I finally posted an instructable tutorial for this project!
Please go check it out here!
All posts tagged acrylic
Lasercut Boxing Kangaroo Toys Instructable
Posted by katiekhau on April 26, 2012
https://katiekhau.wordpress.com/2012/04/26/lasercut-boxing-kangaroo-toys-instructable/
Kangaroo Toy Update
This is an update from an earlier post that showed my plans to build a boxing kangaroo toy. The template was made in Illustrator on a 12″x24″ document (now .pdf). Here is the template with all the parts outlined in case you want to use it:
Here is the final out come after it was built:
Kangaroo Toy
It was laser cut from 1/4″ acrylic and aluminum tubes are holding it together. I also put some rubberbands over the wheels for better traction. I now think I should make a blue one so I’ll have rock’em sock’em kangaroos.
Posted by katiekhau on January 31, 2012
https://katiekhau.wordpress.com/2012/01/31/kangaroo-toy-update/
Kangaroo Toy Concept
Perspective Sketches
Orthographic Sketches
Marker Sketch
These are my concept sketches for a kangaroo boxing toy I want to create. The perspective and the orthographic sketches are done on 18″x24″ and the marker is done on 14″x17″. I have almost finished the template and will go to the fabrication lab to go print it out on the laser cutter. I’m hoping to print it out in acrylic and use aluminum tubing to put it together. Wish me luck!
Posted by katiekhau on January 28, 2012
https://katiekhau.wordpress.com/2012/01/28/kangaroo-toy-concept/
Subscribe!
katiekhau 