Pacman Golf Hole

For my final project for my industrial design class we were required to work in groups and create a miniature golf hole. We decided to make a Pacman golf hole.

Pacman Sketch

This was our original concept sketch of what we were trying to build for the golf hole.

Final Golf Hole

This is what our final project looks like now. The ball goes up the ramp, if it hits the center ghost it will fall into Pacman’s mouth, if it hits either of the side ghosts it will just fall back down the ramp. The entire thing is made from 1/4″ and 1/2″ plywood. 1/4″ plywood pieces such as Pacman and the ghosts were cut with a laser cutter from the Champaign-Urbana Fab Lab and the 1/2″ plywood such as the ramp was cut with a band saw. Pieces were both spray and hand painted, then assembled with wood glue.

Previous Post
Leave a comment

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s

%d bloggers like this: